SC247    Topics     News

Could “dim pricing” be the financial savior for the LTL sector?


Anybody who thinks there is nothing new happening in the $35 billion less-than-truckload (LTL) sector isn’t paying attention to undercurrents in the once-staid, regulatory-bound LTL industry.
  
Just under the radar, LTL carriers are rapidly investing in expensive, on-dock, three-dimensional size measurement capturing machinery. LTL carriers are hoping one day of being able to more accurately charge shippers rates based on the actual dimensions of their shipments, rather than the traditional weight-and-distance-based formula that has been in effect since the 1930s or even earlier.
 
These “dim” machines already are being tested by industry giants FedEx Freight, YRC Worldwide, Old Dominion, Saia, and probably many other carriers in the LTL space.
    
Joel Clum, president of Carrier Direct, a trucking consulting firm, says dimensional pricing could soon “revolutionize” the LTL sector. He says the current weight-based and freight classification system is outdated should be replaced by the dimensional weight approach which is easier to understand and easier to automate.
 
Others agree, to a point. Satish Jindel, president of SJ Consulting, Pittsburgh, which closely tracks the LTL sector, said dim pricing could aid carriers’ profitability but might be difficult to implement because of the variety of shipments that by definition move every day in LTL carriage.

But the LTL sector might be ripe for change simply because of its composition. Unlike the highly fragmented truckload sector where the largest carrier (Swift) barely has 1 percent market share, the LTL sector has greater consolidation. The top six LTL carriers (FedEx Freight, YRC regional and long-haul, Con-way, UPS Freight, ABF and Old Dominion) carry more than half of the freight.
 
The problem, as always with trucking, is capacity. Lightweight, bulky LTL shipments tend to “cube out” before they “weigh out” in a traditional 53-foot trailer that is allowed to carry 80,000 pounds.
  
Right now, there is little penalty for shippers and manufacturers who clumsily package shipments in air-filled boxes that take up excess room in trailers. Twenty pounds of toilet paper costs roughly the same to ship whether it’s in a 10-foot by 10-foot by 10-foot box, or it’s in a box that’s 25-by-25-by-25.
 
That could all change if dim pricing methodologies were instituted by the LTL carriers. Any carrier who encountered, for example, two 10,000 pound shipments of lower classified freight that filled an entire 28-foot or even 53-foot trailer has long coveted a method to raise the revenue for that shipment, or any other shipment that weighed less than 15 pounds per cubic foot.
  
Also, experts say, this pricing revolution could be implemented only if virtually the entire $35 billion LTL sector moves in lockstep to institute it. Because of antitrust laws and other competitive factors, that could be difficult—and might ultimately lead to lawsuits by reluctant shippers.
  
Chuck Clowdis, the veteran trucking research analyst, said dimensional LTL pricing has been discussed by truckers for at least for the past 10 years, and maybe longer.
 
“I recall nearly three decades buying tape measures and training a sales force in how to attempt a rudimentary estimation of cube and the impact on trailer space utilized,” Clowdis recalled.   “Carriers attempted some pricing regs that raised the rates for any single shipment taking an entire trailer but the problem persisted.”
 
The problem is carriers allowed the ubiquitous “FAK”––“Freight All Kinds”––rating concession surge rob them of one remedy—the true classification of Class 100+ freight.
 
About a decade ago, trucking consultant Hank Mullen pushed the dim pricing idea but couldn’t move it forward.  However, now that “laser-driven dimensioners” have been made affordable to LTL carriers, the dim pricing idea has gained traction anew.
  
“We need to simplify this process,” says FedEx Freight CEO Bill Logue. “It’s not going to happen overnight. Different customers will have different needs. It will be a long-term, dual type environment. It will take a long time.”
  
Shippers, no doubt, will have a major say in this gravitation away from traditional class-rating system. Certainly the carriers will be better able to charge compensatory rates on lower classified, lightweight shipments. But the shipper will need to see value in this change, or else he or she will gravitate to one of the LTL carrier holdouts that can be counted on to buck the new system, experts said.
 
Already, UPS and FedEx are planning widespread use of dim pricing in their small package units, starting early next year. But whether that system can be expanded to the more staid LTL industry is an open question that even industry leaders have doubts.
  
“The LTL industry is complicated because it’s tied to class pricing system,” Logue explained. “We use zone density based pricing that is very clear. A large portion of our business is small to medium customer that wears many different hats. Simplification is very important. They’re used to it on parcel side.”
 
“There is a large customer base that could move to simplified process as you build it,” Logue said.  “Others could migrate to it. Whatever is right for that customer.”

Logue said FedEx Freight is already testing overhead dim machines in its regions to capture dimensions. In the short term, that information is being used to capture accurate dimensions of current shipments, and enables the carrier to making rate adjustments when it can.
 
“But more important, it helps us build our costing models,” Logue explained. “We have real data on that customer. That is the long term value. It makes us better at costing.”
  
Logue said FedEx Freight would “expand that capture rate as we see the value. I don’t think we’re there yet. As long as we’re clear that dim machines work and are accurate, the data is what the data is. Overhead capture of dim is just another tool. It is not the end-all for dim pricing.”
 
A major advantage for the customer, Logue explained, is in automation. He said the new dim pricing model is “ideal” for small and medium-sized customers already using FedEx Ground and Express for parcel deliveries. With this model, “There is no need for another LTL carrier,” Logue said, explaining that FedEx Express, Ground and LTL services can be offered on one platform.
  
“We’re trying to make LTL experience as simple as the parcel experience,” Logue concluded.
He said more than 90 percent of FedEx Freight customers already are using other services offered by FedEx. “Bundling is one of our key values and one of the great successes to our growth,” he said.

“If you can make customer process ore time effective and easier, customers will migrate to it,” Logue predicted. “There are challenges. But if you can give an expedited solution that works, they’ll migrate to it. That small- and medium-sized customer is looking to reduce time and improve value. If you put it out there, it will be well received.”
  
Still, Logue conceded the LTL industry has “long way to go” in the dim pricing revolution, but added, “We’re working hard to put the pieces together.”


Article Topics


Latest News & Resources





 

Featured Downloads

Navigating Procurement’s Digital Transformation with AI
Navigating Procurement’s Digital Transformation with AI
In today's rapidly evolving business landscape, the role of AI in reshaping procurement and supply chain operations is undeniable. This whitepaper by...
Unified Control System - Intelligent Warehouse Orchestration
Unified Control System - Intelligent Warehouse Orchestration
Download this whitepaper to learn Unified Control System (UCS), designed to orchestrate automated and human workflows across the warehouse, enabling automation technologies...

An Inside Look at Dropshipping
An Inside Look at Dropshipping
Korber Supply Chain’s introduction to the world of dropshipping. While dropshipping is not for every retailer or distributor, it does provide...
C3 Solutions Major Trends for Yard and Dock Management in 2024
C3 Solutions Major Trends for Yard and Dock Management in 2024
What trends you should be focusing on in 2024 depends on how far you are on your yard and dock management journey. This...
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
In this industry guide, we’ll share some of the challenges manufacturers face and how a Right-Sized Packaging On Demand® solution can...