Lenze expands its i500 frequency inverter range
Lenze (Booth 4419) is making all the advantages of this communication system available for decentralized applications.
IO-Link now in a decentralized frequency inverter – this hasn’t been available in the harsh environment outside the control cabinet until now. Lenze (Booth 4419) is making all the advantages of this communication system available for decentralized applications.
IO-Link makes it easy to integrate the sensors and actuators distributed in an application into the master control level in order to exchange process, asset or parameterization data. There is no need for expensive special cables, or to address the nodes manually. If an IO-Link master is already in use in a network, the new i550 protec can be connected at a low cost – regardless of the higher-level control system.
The devices are parameterized automatically during standard set-up or as part of an in-service device replacement. Lenze is the first drive manufacturer to master the standard v1.1, which is necessary for this automatic data exchange. It is also easy to flexibly connect the new decentralized communication standard ASi-5 to the Lenze i550 IO-Link interface. Furthermore, all other common fieldbus interfaces are optionally available.Even outside the control cabinet, the available space in machines and systems is quite limited. With the i550 protec, Lenze is launching an exceptionally compact device in comparison to the market.
For example, the Lenze i550 protec with 0.75 kW and 3.1 dm³ is at least half the size or even smaller than typical solutions on the market. The design of the devices with IP66 (NEMA 4X) outdoor & indoor degree of protection ensures maximum protection against adverse environmental conditions such as high temperatures, dust, dirt or water jets during cleaning operations. In summary, the newcomer to the i500 frequency inverter range opens up new possibilities for mechanical engineering to control drives outside of the control cabinet – without renouncing the familiar look-and-feel in usability, flexibility, function and scalability of the product range.
The i550 protec is particularly suitable for large-scale machines, distributed applications in material flow or apparatus engineering, or wherever control cabinet space is expensive. As a result, you can achieve significant installation cost savings; for instance, there is no need for expensive shielded motor cables and several inverters are connected to a secured power bus to optimize costs. Typical examples include conveyor belts, fans, pumps, main drives or even lifting units.
