Outsourced Quality and Sustainable Manufacturing in a World of Disruption

Quality and sustainability in an era of change: outsourcing manufacturing.

While the goal of global sourcing and using outsourced manufacturing is to lower manufacturing costs, the increased complexity that comes from leveraging internal and external manufacturers brings significant challenges.

Supply Chain Visibility

Chief among these are the obstacles to managing visibility and control, obstacles that can negate financial benefits. For instance, when quality issues arise, the disconnected and far-flung nature of third-party manufacturing makes them hard to detect.

At the same time, early detection becomes crucial, especially in regulated industries like pharmaceuticals or food and beverage, to prevent the snowballing of additional costs and production time spent on more units that share the defect.

A brand owner’s ability to quickly determine the root cause at any stage of production, track all affected products and efficiently conduct a recall is critical. The sooner the issue is detected, the less impact on the brand, cost, and consumer safety.


But tight quality control in globalized manufacturing also has significant implications on a brand’s sustainability footprint. For example, to truly understand their carbon impact, brands will have to examine how much carbon is emitted along their entire value chain, from sourcing to delivery, and then in the use and disposal of their products.

It’s important to look at the complete lifecycle, not just the internal operations. Emissions not tied directly to the operation of company facilities and vehicles are known as Scope 3 emissions. The footprint to produce goods and dispose of defective ones falls under Scope 3, and pressure is growing for companies to disclose and reduce their footprint. This can be a daunting task, especially when you don’t have much visibility beyond your four walls.

So, what is needed to overcome manufacturing challenges?

Overcoming these and other manufacturing challenges can be broken down into four core areas: reduced footprint, complete manufacturing visibility and control, quality assurance, and recall prevention. Let’s dive into the details of each area below.

Footprint Downsizing

Returned goods almost always represent a massive waste—financial and emissions-related. Manufacturers incur return shipping costs, staffing costs to sort, repair, repackage, and re-sell the merchandise, or else dispose of it. In certain industries, returned merchandise is routinely disposed of, resulting in pure waste.

Sometimes, however, returns are due to a product recall by manufacturers. One way companies can help their end-to-end carbon emissions is to ensure that returns aren’t due to a quality issue. This means preventing quality issues entirely or detecting them as early as possible in the product lifecycle—well before they’re shipped to consumers.

Processes and technology put in place to help detect potential quality issues—whether inherent to the materials, the assembly process, or some other factor—can have a meaningful and even quantifiable impact on carbon emissions. In this way, investing in visibility and control throughout your third-party manufacturing operations is an important aspect of sustainable business.

Visibility and Control

Brands should consider outsourced manufacturing as an extension of their internal processes and work to gain the same visibility and control with contract manufacturers. Therefore, the solutions brands evaluate, or perhaps currently have in place, need to provide visibility and control across the end-to-end manufacturing ecosystems—including internal and external operations—across all production stages and nodes. They also need to be able to receive shop floor and quality metrics from each facility in the ecosystem to proactively identify nonconformances in processes and quickly address issues before they affect other areas of the supply chain.

By proactively collaborating with manufacturing partners to ensure all designs and instructions are clear, and by identifying issues early in the production cycle, companies can reduce costs, delays, poor quality, less-than-optimal production, and the overall sustainability footprint per unit. In many ways, manufacturing visibility and collaboration contribute to a more profitable and efficient business for brand owners by extending control to internal and contracted manufacturing in lockstep.

Risk and Quality

Brand owners need to be able to continuously monitor production quality and be alerted when quality issues arise. It is essential for customer service and manufacturing operations teams to be able to trace and control inventory by lot or batch across all production and quickly understand the cause of potential defects to pinpoint which goods are affected. This requires a connected platform and AI-driven solutions that bring together enterprise resource planning (ERP), production, quality, and other related data from all disparate systems.

The supporting technology should be able to proactively identify when quality issues arise, or recalls are required, by analyzing the entire production process—internal and external—to determine the root cause, track any affected products, and lay the groundwork for efficient, precise recalls that minimize risk and waste.

Manage Recalls

Although brand owners maintain strict quality standards, the continued rise in outsourcing and the variability of raw materials has led to an increasing number of defective goods. In certain industries, recalls for faulty goods are required and carefully regulated.

Companies must be able to rapidly identify the affected products, remove them from the supply chain and issue replacement goods. These activities come at an enormous cost, especially if the company cannot identify which goods are defective and are forced to recall and replace goods that aren’t affected.

It’s important for brands to track the route to market for specific lots and batches—and even serialized components and finished goods—using commonality analysis to pinpoint the affected products. Equally valuable is the ability to use highly flexible and configurable data models to simulate multiple recall scenarios and identify the most efficient one. This can make recalls surgically precise and far less carbon-intensive to conduct.

Conducting recalls in this way, however, requires end-to-end visibility across channel, logistics, global trade, and supply ecosystems, plus the ability to orchestrate remedial actions across multiple cross-functional and cross-enterprise areas.

So, where should brands start?

New technology is required to support this strategy. In particular, a single platform that connects all internal and external manufacturing processes and systems and provides the decision-grade data required for optimal production, less risk, and recall prevention. It also takes integrated, artificial-intelligence-driven applications to orchestrate it all from start to finish and help monitor the results.

E2open brings all the pieces together on a connected manufacturing platform. With broad and deep capabilities that grow with you as your business needs mature, your manufacturing becomes a strategic advantage and can enable you to sustainably meet today’s requirements while equipping the entire organization for future success.

Related: Mitigating Supply Chain Disruption in the Wake of Severe Weather and Disasters

Related Resource

Download the Paper

Logistics as a Service
How logistics experts can reduce spending, save time, and increase company profits. Download Now!

Article Topics

E2open News & Resources

E2open President and CEO Farlekas Provides Logistics Trends and Themes Overview
E2open Transportation Management Solution to Simplify Your Logistics
Supply Chain Disruptions and the Next Normal for Logistics in 2023
Outsourced Quality and Sustainable Manufacturing in a World of Disruption
Mitigating Supply Chain Disruption in the Wake of Severe Weather and Disasters
Uber Freight & E2open to Provide Real-time Transportation Rate and Capacity Options
Tracking and Reducing Transportation Emissions
More E2open

Latest in Supply Chain

Cleo Announces New Supply Chain Management Tools for Integration Cloud Platform
ASCM Honors Supply Chain Management Leaders with Awards of Excellence
US Container Traffic Boosted by Back-to-School Rush
Bank of America Introduces Digital Supply Chain Finance Platform
Moody’s: Carbon Offsets Open Supply Chains Up to Financial, Reputational Risks
Shippers Focus on Yield Management as Rates Continue to Rise
ASCM Releases Top 10 Supply Chain Trends for 2024
More Supply Chain
Supply Chain

E2open is the connected supply chain software platform that enables the world’s largest companies to transform the way they make, move, and sell goods and services. With the broadest cloud-native global platform purpose-built for modern supply chains, e2open connects more than 400,000 manufacturing, logistics, channel, and distribution partners as one multi-enterprise network tracking over 12 billion transactions annually. Our SaaS platform anticipates disruptions and opportunities to help companies improve efficiency, reduce waste, and operate sustainably. Moving as one.

View E2open company profile


Featured Downloads

Rapidly Improve the Performance of Your Warehouse Logistics
Rapidly Improve the Performance of Your Warehouse Logistics
The Rapid Performance Evaluation identifies opportunities and potential improvements in every aspect of warehouse logistics operations; performance, productivity, service, quality, and systems.
Resource Management System (RMS): How to Effectively Leverage Your Assets
Resource Management System (RMS): How to Effectively Leverage Your Assets
This guide provides an in-depth analysis of the potential of various resources available in a warehouse and how they can be utilized...

Sustainable Supply Chain Insights From PITT OHIO
Sustainable Supply Chain Insights From PITT OHIO
A whitepaper on supply chain insights gleaned at the LEED-certified gold Cleveland transportation and sustainability summit.
20 Warehouse & Distribution Center Best Practices for Your Supply Chain
20 Warehouse & Distribution Center Best Practices for Your Supply Chain
In this guide, we picked the brains of our supply chain engineers to find ways to improve warehouse and distribution center efficiency...
SOLOCHAIN WMS plus a Guide to Warehouse Management Systems
SOLOCHAIN WMS plus a Guide to Warehouse Management Systems
In these 2 'papers' Solochain WMS, we detail Manufacturing Execution System capabilities and Generix's portfolio of SCM solutions to manage all distribution logistics,...