Warehouse News

Have you checked your lift truck tires enough lately?

Probably not. But as you’re about to read, plenty of opportunities are available to spend too much too often if you ignore proper maintenance.

So, what exactly do you know about lift truck tires? The standard answer is: They’re black, round and roll. And at that point, most people run out of details. Trouble is, lift truck tires are a complicated consumable, and they require regular attention.

“Tires are one of the highest cost maintenance components of lift trucks. It is not uncommon for them to account for 30% of fleet maintenance costs,” according to Kristian Rendtorff, fleet manager at Associated, one of Raymond’s largest dealers.

In fact, tires can stop being all that round and rolling all that well for plenty of reasons. It’s the case whether the tires are solid, cushion or pneumatic or made of rubber or polyurethane. The danger zones for all tires are heat, wear, abuse and misapplication. A solid maintenance program is the best way to monitor tire wear and ensure you are getting the right balance of tire performance and life.

Start with tire selection

Interestingly, tire maintenance actually starts with tire selection. In the end, say the experts, tire maintenance is all about performance out on the floor.

“If you don’t have the right tires on the truck, it won’t run or stop as it should,” says Tyler Nations, account manager at Thombert.

To begin, several options are available when it comes to materials and design.

Materials options are rubber and polyurethane. But, it’s not an on/off switch. Tire manufacturers offer many different compounds including custom ones for specific applications.

For instance, standard rubber tires suffice for most general warehouse use. But in freezers, a special compound is typically added to a rubber tire to improve traction.


Non-marking white rubber compound as well as polyurethane tires are well suited to food and pharma applications.


Meanwhile, some industries such as food and pharma require non-marking tires. That precludes use of standard carbon black rubber tires. Options here are either a non-marking rubber compound without carbon black or standard polyurethane tires.

Design options fall into two broad categories. Rubber tires are either solid/cushion or pneumatic. Polyurethane tires are solid. Rubber tires are used primarily on internal combustion (IC) trucks. Polyurethane is primarily used on electric narrow aisle trucks as well as motorized hand trucks.

The other design issue focuses on traction requirements. Smooth tires and tires with tread are available. Tire suppliers and lift truck dealers are experts at making the right choice here.

It’s also worth noting that tires do serve another, often overlooked purpose—cushioning the lift truck and its loads. But, even that is a series
of tradeoffs.


Performance capabilities of tires depend on the application and rubber compound selected.


Pneumatic tires offer excellent cushioning capabilities but are susceptible to punctures from foreign objects on the shop or warehouse floor. On the flip side, solid/cushion tires allow heat to build up especially during long runs, relatively decreasing their cushioning capability.

The performance capabilities of rubber and polyurethane tires vary. Specifics always depend on the application and tire compound selected. In addition, performance will vary depending on the tire material and design.

“The best approach to tire selection is to buy the tire best suited to the job regardless of upfront cost,” says Jim Caruso, business development manager at Trelleborg Wheel Systems. “It is usually more cost effective to go with a premium tire that holds up the application,” he adds.


A digital monitoring platform tracks tire heat and pressures remotely throughout the warehouse.


Enemies of tires

When it comes to tire maintenance, several factors can reduce tire life. These range from heat and wear to floor debris and aggressive drivers. Some of these you can control, others not so much.

“Heat is a tire’s worst enemy,” says Caruso.

When lift trucks accelerate, decelerate and run in the warehouse, heat builds up regardless of tire type. “You want the coolest running tire possible,” explains Trelleborg senior technical manager Steve Petrescu.

Heat buildup stresses different tires in different ways. If they run too hot, polyurethane tires fail from hysteresis where the polyurethane actually liquefies in the tread. Rubber tires stress crack under excessive heat. Both problems shorten tire life.

“Wear resistance is another other major consideration,” says Matt Futrelle, sales and marketing manager for commercial specialty tires at Continental Tire the Americas.

The tire’s wear resistance depends on several factors. Selecting the right compound for the application is paramount. But other considerations range from debris on the floor to the driving habits of operators. The former can cut tires and even remove chunks. Drivers create flat spots on tires by starting and stopping too aggressively.

Caruso of Trelleborg emphasizes house cleaning as a key factor in maintaining tire life. And, he’s not just talking about picking up the occasional steel band on the floor or broken pallet parts. He includes elements of the floor itself such as rough floor seams and raised expansion joints. Running over dock plates can have much the same effect.

Still another cause of premature tire wear, says Associated’s Rendtorff, is excessively driving the truck in a single, circular route, much like NASCAR racing. “The result is coning which tapers the tire, bringing it out of round,” he says.

With pneumatic tires in particular, inflation is a determiner of wear. Tires need to be inflated to proper levels to maximize service life.

Nations of Thombert identifies some other enemies of tires. Leaders here are include the intensity of the application and frequency of use.

Tires, he says, have to be replaced more frequently if trucks make long runs with heavy loads. The heat buildup can cause stress cracking on side walls that shorten tire life. This problem is exacerbated if the truck consistently moves loads at near its capacity rating. Excessive speed has much the same effect.

Frequent movement of loads that are too light can be a problem, too, says Petrescu. As an example, he cites a 5,000-pound capacity truck that constantly carries loads under 1,000 pounds.

“That truck is better off carrying loads of 2,500 to 3,000 pounds. Lighter loads actually stress the truck’s steer tires because the load doesn’t balance out the counterweight above them,” Petrescu adds. The result is stress cracking and radial cracking.

As nice as it would be to predict the life of tires, it really can’t be done. Futrelle simply says there is no average life of a tire. It could be a range as wide as 4,000 to 7,000 hours, depending on operating conditions.

Instead, the bottom line, says Futrelle, is “getting the most hours out of a tire without them being ripped, cut, torn or cracked.”


Tires need more frequent replacement if trucks carry heavy loads and make long runs.


Monitoring tire condition

“Every company with a lift truck fleet needs to build a maintenance program to manage both tire performance and costs,” says Rendtorff. “Unfortunately, too many companies are not very good at this, compromising both service levels and their own bottom line,” he adds.

That creates a pinch point, but one that can be managed.

In the past couple of years, lift truck suppliers have made a push on increasing telematics capabilities. At last count, one supplier was recording data to establish metrics from more than 70 different sensors on its trucks. Unfortunately, tire condition is not part of that or any other telematics program.

Tire suppliers are making a run at this, however.

Trelleborg offers a wear gauge to manually measure tread life on tires. The company also builds into some tires a colored wear line that indicates when replacement is needed.

A digital handheld tool and a digital monitoring platform are available from Continental. The former is mounted in the truck and monitors pressures and heat, displaying the data on a small monitor. The platform, called ContiConnect, is a centralized system that remotely monitors tire pressure and heat in real time across a facility’s entire fleet. It is being rolled out in pilot programs worldwide.

While those are two data collection tools, they are only one part of a tire maintenance program.

Rendtroff says a tire program should be part of a company’s overall truck maintenance regimen. He says doing it right can reduce tire maintenance costs by 20%.

The starting point, says Rendtorff, is to collect accurate lift truck maintenance costs. “Most companies have bits and pieces here that are both incomplete and inconsistent,” he explains.

While not enough by itself, complete and accurate data is essential to determining the root cause of tire maintenance problems. “That’s essential to hitting that 20% savings goal,” says Rendtorff.

With all of that in place, a company should then build a pilot program to tightly monitor a small number of trucks initially. As this proves its worth, maintenance monitoring can be extended out to an entire fleet and even multiple locations.

The good news, Rendtorff, explains, is that companies don’t have to go it alone. Certain lift truck dealers are equipped to be a partner. Similarly, tire suppliers have maintenance programs in place, too. Or, as Futrelle says, “most want a turnkey program. If you have to think about your tires, then you probably have the wrong vendor.”

While lift truck tires are black, round and roll, maintenance is quite a bit more complicated. In fact, there’s real money up for grabs here. Not to mention improved operational efficiency and fewer unexpected headaches. Probably worth some time this week.

Companies mentioned in this article:

Associated, a Raymond dealer
Continental Tire the Americas
Thombert
Trelleborg Wheel Systems


Article Topics
Lift Trucks   MRO   Raymond   Tires   Trelleborg   All topics


Comments
You must be logged in to post a comment. Login.

 
Latest Warehouse News
10 Questions to Ask Prospective Warehouse Management System Vendors
During your decision-making process with WMS vendors, as well as asking about functional requirements, make sure you ask questions about system performance and scalability, security and data protection,…

Onnit Customer Success Story with SkuVault Warehouse Management System
Onnit is a brain, workout, and health supplements company based in Austin, TX., learn how a SkuVault Warehouse Management System and ShipStation integration helped the business scale and decrease mis-ships…

RightHand Robotics Picking Up Where Amazon’s Kiva Systems Left Off
RightHand Robotics, a Somerville, Mass-based company founded in 2014 by Leif Jentoft and Yaro Tenzer, closed a $23 million Series B round for its RightPick robotic piece-picking technology.

Honeywell and Fetch Robotics Deliver Autonomous Mobile Robots to DCs
Expands smart robotics portfolio to help warehousing operations fulfill growing e-commerce orders more efficiently.


 

24|7 Pro Team

The 24|7 Team is your direct pipeline to solutions for your business challenges. It's your opportunity to have supply chain and logistics experts look at your specific challenges and needs, and give you free, no-obligation advice, solutions, and information.

The 24|7 Team will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your Request for Proposal list.

1
  Choose a topic for your RFP

Transportation RFP/RFI

The Transportation RFP is your direct pipeline to solutions for your transportation challenges. It's your opportunity to have logistics experts look at your specific transportation challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request.

Choosing the perfect software or system can be an indomitable challenge. Using this transportation/TMS RFP will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your Request for Proposal list.

Warehouse/DC Management RFP/RFI

The Warehouse Management Systems (WMS) RFP is your direct pipeline to solutions for your WMS challenges. It's your opportunity to have logistics experts look at your specific WMS challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request.

Choosing the perfect WMS solution can be an indomitable challenge. Using this WMS RFP will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your WMS Request for Proposal list.

Supply Chain RFP/RFI

The Supply Chain RFP is your opportunity to have logistics experts look at your specific challenges and needs, and receive free, no-obligation advice, solutions, and information. It simplifies finding a pool of likely partners, building your knowledge base, and preparing your Request for Proposal list. The companies in the Logistics Planner have agreed to respond to your request for in-depth information and follow-up, and your request is totally confidential.

Software/Technology RFP/RFI

The Software/Technology is your direct pipeline to solutions for your logistics information technology challenges. It's your opportunity to have logistics experts look at your specific technology challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request. Whether it's WMS, TMS, Mobile or Cloud, our pros can help.

The companies listed below have agreed to respond to your request for in-depth information and follow-up. Your request is totally confidential.

Executive Education RFI

The Logistics and Supply Chain Education RFI can help you identify the schools, coursework, continuing education, distance learning and certification opportunities available from leading logistics educational institutions.

Upgrade and improve your logistics and supply chain skillsets. Whatever route you choose—advanced degree, executive education, certification or distance learning—the time and money you invest in your education today can pay off in continued career success tomorrow. Contact leading universities and professional institutions for the information you need to prepare for the future.

Third Party Logistics RFP/RFI

This 3PL Request for Proposal (RFP)/Request for Information (RFI) can help you find the 3PL and 4PL providers that can meet your specific 3PL service challenges and needs. The 3PL companies below will provide free, no-obligation third-party logistics advice, solutions, and information.

Ask your 3PL questions, you'll get answers. Simply complete the information, and detail your 3PL challenges. Then, check off the third-party logistics companies that you want to review your request.

1. Choose an RFI topic.
2. Enter your contact information and challenge.
3. Select companies and optional categories.
4. Submit.


2

Your Information



Your Challenge, Problem or Request *

3

Select Transportation Companies

  • Select All

  • 3Gtms
  • BluJay Solutions
  • CSX Trans. Intermodal
  • Kuebix
  • Landstar
  • Legacy Supply Chain Svs.
  • One Network
  • Pitt Ohio
  • Purolator
  • Quintiq
  • SEKO Logistics
  • SMC3


Select Relevent Categories

  • Air Freight
  • Intermodal
  • Motor Freight
  • Ocean Freight
  • Rail Freight
  • TMS

Select Warehouse/DC Management Companies

  • Select All

  • 3PL Central
  • Apex Supply Chain Tech.
  • Honeywell Intelligrated
  • Kuebix
  • Legacy Supply Chain Svs.
  • Swisslog
  • Westfalia Technologies
  • Zebra Technologies


Select Relevent Categories

  • Auto ID & Data Capture
  • Automation
  • Conveyors & Sortation
  • Lift Trucks
  • Packaging & Labeling
  • Pallets & Containers
  • Shelving & Racking
  • WMS

Select Supply Chain Companies

  • Select All

  • 3Gtms
  • 3PL Central
  • Amber Road
  • Apex Supply Chain Tech.
  • APICS
  • BluJay Solutions
  • CSX Trans. Intermodal
  • Frontier Business
  • Kuebix
  • Landstar
  • Legacy Supply Chain Svs.
  • Logility
  • One Network
  • Purolator
  • Quintiq
  • SMC3
  • Synchrono
  • TAKE Supply Chain
  • Westfalia Technologies
  • Zebra Technologies


Select Relevent Categories

  • Global Trade
  • Inventory Management
  • Risk Management
  • Sustainability

Select Software/Technology Companies

  • Select All

  • 3GTMS
  • 3PL Central
  • Apex Supply Chain Tech.
  • BluJay Solutions
  • Honeywell Intelligrated
  • Frontier Business
  • Kuebix
  • Logility
  • One Network
  • Quintiq
  • SMC3
  • Swisslog Logistics
  • Synchrono
  • TAKE Supply Chain
  • Zebra Technologies


Select Relevent Categories

  • ERP
  • Sales & Operations
  • Sourcing/Procurement
  • Optimization
  • Transportation Mgmt
  • Warehouse Mgmt

Select Executive Education Choices

  • Select All

  • Graduate Courses
  • Online/Distance
  • Executive Education
  • Certifications
  • Undergraduate
  • Seminars
  • Associations
  • Conferences
  • Tradeshows


Select Third Party Logistics Companies

  • Select All

  • 3PL Central
  • Landstar
  • Legacy Supply Chain Svs.
  • Purolator
  • SEKO Logistics
  • Westfalia Technologies


4
 

24|7 Company Profiles