Warehouse News

Don’t ignore your warehouse floors

Here are seven steps that all warehouse and DC managers should be taking to preserve the life of their facility floors.

If you don’t think your warehouse or DC floors take a lot of abuse, think again. As the substrates that literally support all of the activities that take place within the four walls every day, floors tend to get ignored until they fail. Then, there’s a mad scramble to fix the problem to avoid safety problems or work interruptions. Unfortunately, this reactive approach to floor maintenance can quickly translate into high costs and downtime.

“A floor that’s not cared for will certainly have a much lower lifespan than one that is,” says Kevin Klotz, president of Coatings for Industry. “That care can range from basic cleaning to applying coatings to your floor, but either way—as with most things—you’ll certainly extend the life of your asset by taking care of it.”

Ignore this reality, and it won’t be long before you find yourself pouring new concrete, installing an expensive overlay system, or hiring someone to come in to repair the cracks in your floor. “Concrete may look strong, but it really isn’t,” Klotz points out. In high-traffic settings like DCs, for example, lift trucks traverse the floor all day, items fall off shelves, and workers drop tools. “These impacts can be difficult for concrete to handle,” he says. “In fact, using a ballpeen hammer, you can lightly tap concrete into powder.”

That’s exactly why floors should be at the top of any warehouse or DC manager’s maintenance routine. “When you have a clean, level surface to work from, everything in your operation performs better,” adds Tatsuya Nakagawa, co-founder of sustainable floor coating firm Castagra Products. “On the other hand, if your warehouse floor is damaged and uneven, it not only causes safety concerns, it also wears away your equipment.”

Start with a good sweeping

One of the best ways to preserve the life of a DC floor and provide a safe workplace is by sweeping your floors daily. This is critical even for companies that have solid, reliable floors that aren’t showing signs of wear and tear. In other words, just because your floor is new—or, because it hasn’t experienced any failures in the past—doesn’t mean you can ignore the daily cleaning ritual.

“All it takes is some dust or abrasives to land on the surface and for your forklifts to drive over that mess to start inflicting damage to your floor,” Nakagawa says. “The problem can surface very quickly, but if you commit to sweeping your floors on a daily basis, you can reduce the chance of that happening.”

Here are seven more steps you can take now to preserve the life of your facility’s floors:

1) Pick flooring that makes the most sense for your business.

Just like you wouldn’t install white, plush carpeting in a playroom, you shouldn’t select industrial flooring based on look or feel. Instead, pick it based on what makes most sense for your business operations. “If there’s a good chance of certain types of chemicals or other liquids spilling onto the floor, be sure to take that into account,” says Nakagawa. And if certain areas of the warehouse or DC need anti-slip protection, be sure to install it (knowing that in some cases these surfaces can be more difficult to clean). “We’ve worked with automotive shops that were dealing with oil and grease spills, which can stain when regular floor coatings are used,” Nakagawa explains. “To remedy that problem, they put a clear coat on top of the concrete to eliminate the staining.”

2) Look at what’s actually causing the mess.

When they realize they have a dirty floor problem, a lot of companies invest in machines that sweep and scrub in one pass, but Richard “Bo” Bodo, director of training at Kärcher North America, says that’s not always the best approach. The first step is to look at what’s causing the mess. In many cases, light, sweepable soils are the culprits. “Most warehouses are dealing with dry sand and debris that needs to be swept up off the floor so that it doesn’t contaminate boxes or other items that are moving in and out of the facility,” says Bodo. To reduce the levels of dust, debris and pallet chips, companies look to the sweep-and-scrub machines when they really should focus on sweeping as a stand-alone remedy. “In many cases, companies should be using large sweepers,” says Bodo, “and then using a scrubber as a separate unit.”

3) Pick up larger debris off the floor throughout the day.

Debris like packaging straps and shrink wrap should be picked up before the sweeping starts and preferably on a regular basis throughout the day. One way to keep this type of debris to a minimum is by placing garbage receptacles throughout the facility (i.e., giving employees a place to put the garbage that they’re generating as part of their work). “Remove this waste before doing any type of cleaning,” advises Bodo, who has seen too many packaging straps damage the cylindrical rollers on sweepers and scrubbers. “They can literally create enough friction to cut right through the rollers; that can be an expensive mistake.”

4) If you’re in the snow belt, don’t forget about salt.

Dirt, dust and packaging debris are one thing, but if your DC is situated in a cold climate, then salt is another intruder to think about (at least during the winter months). “Salt literally destroys unsealed
concrete,” says Lou Frank, Coatings for Industry’s director of business development. “If your forklifts are running in and out of the building all day as they load and unload trucks, then they’re going to drag the salt in with them.” Even with regular cleaning, those impacts can be difficult to reverse, says Frank, who suggests a proactive approach that includes the appropriate floor sealant plus regular sweeping out of any salt that may make its way into the warehouse or DC.

5) Look beyond the warehouse floor.

Most DCs have adjacent offices and other spaces that are probably carpeted or tiled—both of which can be more difficult to keep clean. As employees walk in and out of those areas all day long, they track the dirt, dust and grime from the DC floor with them. “If you’re not cleaning your warehouse floor regularly, that soil gets tracked into the other parts of the building and drives up cleaning costs,” Bodo points out. “Plus, depending on the surface in question, it can actually prematurely damage the carpet or tile and create a situation where it needs to be replaced before its actual useful life ends.”

6) Use the right equipment and cleaners for your floor surface.

“Some chemicals can do more harm than good on specific floors,” says Klotz. “Sure they may clean the floor, but those chemicals—or the equipment you’re using—may also damage it.” Specific points to consider include scrubber brush selection (is it right for the surface?) and cleaning fluid selection (will it harm the coating on your floor?). “If your floor is coated, you may need to use different brushes and solutions than you would on concrete or polished floors,” says Klotz. “Just choosing the right equipment and materials to clean it with are both important considerations.”

7) When in doubt, ask for help.

How can you check whether your cleaners or equipment are right for your floors? Ask your installer or do a spot check in an area off to the side, Nakagawa suggests, just to make sure the cleaning products you’re planning to use aren’t going to damage your investment. Nakagawa recommends neutral Ph cleaners for most floors and tells warehouse managers to watch out for any type of acidic-based cleaner that can eat away at the surface. “Many times people will use something that’s too harsh and wind up with a lot of fading and even physical floor damage as a result,” says Nakagawa, who tells warehouse managers to talk to the contractor, manufacturer or installer for the ideal cleaning instructions for their floors. “A lot of companies skip this step,” he says, “and wind up prematurely damaging their floors.”

Total cost of ownership counts

To companies that want to do a better job of maintaining their warehouse and DC floors, Klotz says the first step is to get a good grasp on how you’re using the facility and the environmental factors that impact that space. What are the temperatures? What’s your traffic like? What could fall onto or spill onto the floor? Are lift trucks going in and out of the building? “Geographically, the answer to the last question can make a big difference,” says Klotz, “depending on what those trucks are dragging in with them.”

Ultimately, Klotz says companies need to factor in the total cost of ownership (TCO) of their floors, knowing that the ones that are best cared for will be around for the long haul—and hopefully also contribute to a safe and accident-free environment. “Ignoring the potential issues and turning a blind eye at them until they become real problems is the wrong way to go,” says Klotz. “Even an isolated spot can worsen pretty quickly, so take care of any failures before they become expensive, monumental challenges.”

Companies mentioned in this article

Castagra Products
Coatings for Industry
Kärcher North America


Article Topics
MRO   Safety   All topics


Comments
You must be logged in to post a comment. Login.

About the Author
Bridget McCrea, Editor
Bridget McCrea is a Contributing Editor for Logistics Management based in Clearwater, Fla. She has covered the transportation and supply chain space since 1996 and has covered all aspects of the industry for Logistics Management and Supply Chain Management Review. She can be reached at [email protected], or on Twitter @BridgetMcCrea
 
Latest Warehouse News
10 Questions to Ask Prospective Warehouse Management System Vendors
During your decision-making process with WMS vendors, as well as asking about functional requirements, make sure you ask questions about system performance and scalability, security and data protection,…

Onnit Customer Success Story with SkuVault Warehouse Management System
Onnit is a brain, workout, and health supplements company based in Austin, TX., learn how a SkuVault Warehouse Management System and ShipStation integration helped the business scale and decrease mis-ships…

RightHand Robotics Picking Up Where Amazon’s Kiva Systems Left Off
RightHand Robotics, a Somerville, Mass-based company founded in 2014 by Leif Jentoft and Yaro Tenzer, closed a $23 million Series B round for its RightPick robotic piece-picking technology.

Honeywell and Fetch Robotics Deliver Autonomous Mobile Robots to DCs
Expands smart robotics portfolio to help warehousing operations fulfill growing e-commerce orders more efficiently.


 

24|7 Pro Team

The 24|7 Team is your direct pipeline to solutions for your business challenges. It's your opportunity to have supply chain and logistics experts look at your specific challenges and needs, and give you free, no-obligation advice, solutions, and information.

The 24|7 Team will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your Request for Proposal list.

1
  Choose a topic for your RFP

Transportation RFP/RFI

The Transportation RFP is your direct pipeline to solutions for your transportation challenges. It's your opportunity to have logistics experts look at your specific transportation challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request.

Choosing the perfect software or system can be an indomitable challenge. Using this transportation/TMS RFP will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your Request for Proposal list.

Warehouse/DC Management RFP/RFI

The Warehouse Management Systems (WMS) RFP is your direct pipeline to solutions for your WMS challenges. It's your opportunity to have logistics experts look at your specific WMS challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request.

Choosing the perfect WMS solution can be an indomitable challenge. Using this WMS RFP will simplify the task of creating a database of likely partners, building your knowledge base, and preparing your WMS Request for Proposal list.

Supply Chain RFP/RFI

The Supply Chain RFP is your opportunity to have logistics experts look at your specific challenges and needs, and receive free, no-obligation advice, solutions, and information. It simplifies finding a pool of likely partners, building your knowledge base, and preparing your Request for Proposal list. The companies in the Logistics Planner have agreed to respond to your request for in-depth information and follow-up, and your request is totally confidential.

Software/Technology RFP/RFI

The Software/Technology is your direct pipeline to solutions for your logistics information technology challenges. It's your opportunity to have logistics experts look at your specific technology challenges and needs, and give you free, no-obligation advice, solutions, and information specific to your request. Whether it's WMS, TMS, Mobile or Cloud, our pros can help.

The companies listed below have agreed to respond to your request for in-depth information and follow-up. Your request is totally confidential.

Executive Education RFI

The Logistics and Supply Chain Education RFI can help you identify the schools, coursework, continuing education, distance learning and certification opportunities available from leading logistics educational institutions.

Upgrade and improve your logistics and supply chain skillsets. Whatever route you choose—advanced degree, executive education, certification or distance learning—the time and money you invest in your education today can pay off in continued career success tomorrow. Contact leading universities and professional institutions for the information you need to prepare for the future.

Third Party Logistics RFP/RFI

This 3PL Request for Proposal (RFP)/Request for Information (RFI) can help you find the 3PL and 4PL providers that can meet your specific 3PL service challenges and needs. The 3PL companies below will provide free, no-obligation third-party logistics advice, solutions, and information.

Ask your 3PL questions, you'll get answers. Simply complete the information, and detail your 3PL challenges. Then, check off the third-party logistics companies that you want to review your request.

1. Choose an RFI topic.
2. Enter your contact information and challenge.
3. Select companies and optional categories.
4. Submit.


2

Your Information



Your Challenge, Problem or Request *

3

Select Transportation Companies

  • Select All

  • 3Gtms
  • BluJay Solutions
  • CSX Trans. Intermodal
  • Kuebix
  • Landstar
  • Legacy Supply Chain Svs.
  • One Network
  • Pitt Ohio
  • Purolator
  • Quintiq
  • SEKO Logistics
  • SMC3


Select Relevent Categories

  • Air Freight
  • Intermodal
  • Motor Freight
  • Ocean Freight
  • Rail Freight
  • TMS

Select Warehouse/DC Management Companies

  • Select All

  • 3PL Central
  • Apex Supply Chain Tech.
  • Honeywell Intelligrated
  • Kuebix
  • Legacy Supply Chain Svs.
  • Swisslog
  • Westfalia Technologies
  • Zebra Technologies


Select Relevent Categories

  • Auto ID & Data Capture
  • Automation
  • Conveyors & Sortation
  • Lift Trucks
  • Packaging & Labeling
  • Pallets & Containers
  • Shelving & Racking
  • WMS

Select Supply Chain Companies

  • Select All

  • 3Gtms
  • 3PL Central
  • Amber Road
  • Apex Supply Chain Tech.
  • APICS
  • BluJay Solutions
  • CSX Trans. Intermodal
  • Frontier Business
  • Kuebix
  • Landstar
  • Legacy Supply Chain Svs.
  • Logility
  • One Network
  • Purolator
  • Quintiq
  • SMC3
  • Synchrono
  • TAKE Supply Chain
  • Westfalia Technologies
  • Zebra Technologies


Select Relevent Categories

  • Global Trade
  • Inventory Management
  • Risk Management
  • Sustainability

Select Software/Technology Companies

  • Select All

  • 3GTMS
  • 3PL Central
  • Apex Supply Chain Tech.
  • BluJay Solutions
  • Honeywell Intelligrated
  • Frontier Business
  • Kuebix
  • Logility
  • One Network
  • Quintiq
  • SMC3
  • Swisslog Logistics
  • Synchrono
  • TAKE Supply Chain
  • Zebra Technologies


Select Relevent Categories

  • ERP
  • Sales & Operations
  • Sourcing/Procurement
  • Optimization
  • Transportation Mgmt
  • Warehouse Mgmt

Select Executive Education Choices

  • Select All

  • Graduate Courses
  • Online/Distance
  • Executive Education
  • Certifications
  • Undergraduate
  • Seminars
  • Associations
  • Conferences
  • Tradeshows


Select Third Party Logistics Companies

  • Select All

  • 3PL Central
  • Landstar
  • Legacy Supply Chain Svs.
  • Purolator
  • SEKO Logistics
  • Westfalia Technologies


4
 

24|7 Company Profiles