Truckers Applaud Move to Revert To Pre-2013 Hours of Service Regulations

American Trucking Associations President and CEO Chris Spear praised the inclusion of a permanent hours-of-service restart fix in Congress’ bipartisan Continuing Resolution regarding budget funding in a House Appropriations Committee action to keep the federal government funded through April 17, 2017.


Trucking interests are applauding a congressional fix to the controversial “34-hour restart” provision that was making long-term route planning difficult for shippers and carriers.

American Trucking Associations President and CEO Chris Spear praised the inclusion of a permanent hours-of-service restart fix in Congress’ bipartisan Continuing Resolution (CR) regarding budget funding in a House Appropriations Committee action to keep the federal government funded through April 17, 2017.

“ATA thanks Congress for including what should be a permanent fix to the hours-of-service restart in this Continuing Resolution, and we look forward to its final passage into law to resolve this issue,” Spear said in a statement.

The House Appropriation Committee chaired by Rep. Hal Rogers, R-Ky., included in the must-pass budget resolution a provision requiring the Department of Transportation to follow the existing 34-hour restart Hours of Service rule for truck drivers “to ensure continuity in federal rest regulations” affecting the nation’s 3 million long-haul truck drivers.

ATA President and CEO Chris Spear

“ATA thanks Congress for including what should be a permanent fix to the hours-of-service restart in this Continuing Resolution, and we look forward to its final passage into law to resolve this issue”Chris Spear, President & CEO, American Trucking Associations

“Reverting back to the pre-July 2013 restart shifts the emphasis back to safety by removing flawed data from the rulemaking process,” Spear added.

“The entire industry will now be able to comply with this rule thanks to a common sense approach championed by a bipartisan group of legislators.”

At issue was a trucking industry desire to revere to the 34-hour restart regulations that were in place July 1, 2013. That would mean truck drivers do not need to include two mandatory 1 a.m. to 5 a.m. rest periods which some drivers and fleet executives said was unnecessary and complicated.

Earlier this year the Senate had passed a bill earlier this year that ties the future of the 34-hour restart to a 2014-initiated study on the issue by the Federal Motor Carrier Safety Administration. Details of that long-delayed study done by a Virginia Tech group have never been released.

“While ATA sought the same for preempting states that have added redundant rest break requirements on top of the existing federal standard, ATA will continue to push hard for federal preemption of specific state laws when the 115th Congress convenes next month,” ATA’s Spear said.

A recent Government Accountability Office report (July, 2015) on the effects of changes to truck driver had found that the proposed mandatory rest periods were “life saving measures critical to keeping people safe on the roads,” according to outgoing Transportation Secretary Anthony Foxx.

But ATA officials accused Foxx and FMCSA of “cherry-picking” certain data from the GAO report, but omitting other conclusions. ATA accused the safety administration of “living in Spin City” in its analysis of the GAO report.

During the nearly 18 months in which the new restart provisions were in effect, the GAO report found evidence of reduced driver fatigue and enhanced roadway safety. But ATA said FMCSA ignored most the GAO’s report and instead chose “to cherry pick a handful of points in a desperate effort to influence lawmakers” who were studying the HOS issue.

With an incoming Trump administration expected to try and reduce government regulations across the board, the HOS 34-hour restart issue now seems resolved for the time being by simply turning the regulatory clock back three years.

Read: The Complete Guide to the FMCSA’s 34-Hour Restart Rule

Related Article: Trump Picks Former Labor Secretary Elaine Chao for Department of Transportation Secretary


Article Topics


American Trucking Associations News & Resources

Trucking industry balks at new Biden administration rule on electric trucks: ‘Entirely unachievable’
Groups warn of $1 trillion cost for electrification of America’s trucking industry
New coalition is focused on fighting new Labor Department independent contractor rule
ATA data points to truck tonnage declines to start 2023
December Truck tonnage ends 2023 with a modest gain, reports ATA
ATA warns of ‘tangled mess’ due to latest Labor Department independent contractor ruling
November truck tonnage is down, reports ATA
More American Trucking Associations

Latest in Transportation

Talking Supply Chain: Doomsday never arrives for Baltimore bridge collapse impacts
Amazon Logistics’ Growth Shakes Up Shipping Industry in 2023
Nissan Channels Tesla With Its Latest Manufacturing Process
Why are Diesel Prices Climbing Back Over $4 a Gallon?
Luxury Car Brands in Limbo After Chinese Company Violates Labor Laws
The Three Biggest Challenges Facing Shippers and Carriers in 2024
Supply Chain Stability Index: “Tremendous Improvement” in 2023
More Transportation

American Trucking Associations is the largest national trade association for the trucking industry. Through a federation of 50 affiliated state trucking associations and industry-related conferences and councils, ATA is the voice of the industry America depends on most to move our nation’s freight.



View American Trucking Associations company profile

 

Featured Downloads

GEP Procurement & Supply Chain Tech Trends Report 2024
GEP Procurement & Supply Chain Tech Trends Report 2024
We’ve researched the five biggest trends in the supply chain space this year, and, drawing on our expertise in procurement and...
Unified Control System - Intelligent Warehouse Orchestration
Unified Control System - Intelligent Warehouse Orchestration
Download this whitepaper to learn Unified Control System (UCS), designed to orchestrate automated and human workflows across the warehouse, enabling automation technologies...

An Inside Look at Dropshipping
An Inside Look at Dropshipping
Korber Supply Chain’s introduction to the world of dropshipping. While dropshipping is not for every retailer or distributor, it does provide...
C3 Solutions Major Trends for Yard and Dock Management in 2024
C3 Solutions Major Trends for Yard and Dock Management in 2024
What trends you should be focusing on in 2024 depends on how far you are on your yard and dock management journey. This...
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
In this industry guide, we’ll share some of the challenges manufacturers face and how a Right-Sized Packaging On Demand® solution can...