SC247    Topics     News

ISM June manufacturing report shows nice rebound from May

Coming off somewhat of a “down” month in May, the June Manufacturing Report on Business from the Institute for Supply Management (ISM) showed that manufacturing is indeed still on solid ground.


Coming off somewhat of a “down” month in May, the June Manufacturing Report on Business from the Institute for Supply Management (ISM) showed that manufacturing is indeed still on solid ground.

The ISM reported that the index it uses to measure the manufacturing sector—known as the PMI—was 55.3 in June, up 1.8 percent from May’s 53.5. May marked the first month in 2011 that the PMI did not exceed 60. But even though the last two months were below 60, manufacturing experts said it was likely the PMI would head down a little bit.

Any PMI reading 50 or higher represents economic growth. And despite the sequential decline, June is the 25th consecutive month economic growth has occurred in the overall economy and the 23d consecutive month economic activity in the manufacturing sector has occurred, according to the report.

New orders were up 0.6 percent at 51.6, and production saw a 0.5 percent gain at 54.5. Employment also was up at 59.9 for a 1.7 percent increase.

“The index at 55.3 is positive and welcome news,” said Bradley J. Holcomb, CPSM, CPSD, chair of the ISM Manufacturing Business Survey Committee, in an interview. “A number of people were predicting for a lower reading than that. This recovery in manufacturing has been sustained for 23 months now through thick and thin, and this is another indication of that positive trend.”

The strong employment reading in this report, said Holcomb, represents a very strong optimism and shows that manufacturers are willing to take on more staff and serves as a strong leading indicator of good things to come over the next two months.

Inventories also had a strong month with a 5.4 percent gain to come in at 54.1, while customer inventories were up 7.5 percent at 47.0.

This increase continues and “up and down ride” over the last five months or so, noted Holcomb, and remains in an acceptable range.

“The managing inventories—raw materials, commodities, and inputs to manufacturing—is occurring at an acceptable range and shows good inventory management discipline,” explained Holcomb. “I am not particularly concerned about inventory readings being up over 50 at this point, because of the fluctuation.”

Prices were down 8.5 percent in June, following a 9 percent decline in May for a cumulative 17.5 percent dip over the last two months.

Holcomb labeled this development as very good news.

“The drop-off in fuel has a lot to do with it,” he said. “Gas, oil and diesel helps directly with transportation but it also impacts other things. This is clearly welcome, but there is continuing concern about inflation and prices, with people looking for more relief going forward.”

Manufacturing: ISM reports sector cooling off after rapid growth through first 4 months of 2011
After four straight months of rapid growth in the manufacturing sector to kick off 2011, the Institute for Supply Management (ISM) reported today that overall activity was down somewhat in May.

Manufacturing strength continues in April, says ISM
While consumer spending is dragging somewhat due to increasing fuel prices, manufacturing growth shows no sign of stalling out based on data released today by the Institute for Supply Management (ISM).


Article Topics


About the Author

Jeff Berman's avatar
Jeff Berman
Jeff Berman is Group News Editor for Logistics Management, Modern Materials Handling, and Supply Chain Management Review and is a contributor to Robotics 24/7. Jeff works and lives in Cape Elizabeth, Maine, where he covers all aspects of the supply chain, logistics, freight transportation, and materials handling sectors on a daily basis.
Follow Logistics Management on FaceBook

Latest News & Resources





 

Featured Downloads

GEP Procurement & Supply Chain Tech Trends Report 2024
GEP Procurement & Supply Chain Tech Trends Report 2024
We’ve researched the five biggest trends in the supply chain space this year, and, drawing on our expertise in procurement and...
Unified Control System - Intelligent Warehouse Orchestration
Unified Control System - Intelligent Warehouse Orchestration
Download this whitepaper to learn Unified Control System (UCS), designed to orchestrate automated and human workflows across the warehouse, enabling automation technologies...

An Inside Look at Dropshipping
An Inside Look at Dropshipping
Korber Supply Chain’s introduction to the world of dropshipping. While dropshipping is not for every retailer or distributor, it does provide...
C3 Solutions Major Trends for Yard and Dock Management in 2024
C3 Solutions Major Trends for Yard and Dock Management in 2024
What trends you should be focusing on in 2024 depends on how far you are on your yard and dock management journey. This...
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
Packsize on Demand Packing Solution for Furniture and Cabinetry Manufacturers
In this industry guide, we’ll share some of the challenges manufacturers face and how a Right-Sized Packaging On Demand® solution can...